Some environmental agencies and air permits require accurate documentation of oxidizer service and maintenance records as well as having the necessary spare parts on hand.
S&SE can consult and provide a checklist of recommended spare parts with most oxidizer systems on the market. As a valued aftermarket service we also have trained technicians available on-site to troubleshoot potential failures and recommend the necessary part or spare parts to make repairs as quickly as possible and prevent costly downtime.
S&SE recommended critical spare parts to prevent
down time and meet compliance regulations.
- Please call and speak with an S&SE on site trained technician to identify the right parts for your make and model of oxidizer.
- You can also download the spare parts order form to the right for reference ordering.
QUANTITY | DESCRIPTION |
| 1 | Flame Safeguard |
| 1 | UV Scanner |
| 1 Pack | Chart Recorder Paper |
| 1 | Power Supply (24V) |
| 1 | Motor Starter/Contactor (Combustion Blower/5 HP) |
| 3 | SPDT Relays |
| 1 | DPDT Relays |
| 1 | Master Control Relay |
| 1 | Indicator Switch ( Gas Solenoid Closed Position) |
| 1 | High Gas Pressure Switch |
| 1 | Burner Spark Plug |
| 1 | Actuator Motor (Mod. Motor 4-20 mA) |
| 1 | Air Pressure Switch ( Main Blower) |
| 1 | Air Pressure Switch ( Combustion Blower) |
| 3 | Thermocouple element (INCONEL) 36” |
| 2 | Thermocouple element 24” |
| 1 | Proximity Sensor |
| 2 | Reed Switch |
| 1 | Particulate Filter (Compressed Air) |
| 1 | Filter (Regulator) |
| 1 | Inline Compressed Air Filter Element |
| 1 | Solenoid Valve (Main Valve) |
| 1 | Solenoid Valve |
| 2 | Speed Control Muffler/Silencer (Air Cylinder) |
| 2 | Quick Relief Valve (Air Cylinder) |
| 1 | Pneumatic Cylinder |
| 1 BOX | Panel Lamps |
| 4 | Seal for Poppet Valve |
| 3 Tubes | High Temp Silicone Sealant (Required for Poppet Valve Seal Installation) |
| 1 | Motor Starter/Contactor (Combustion Blower/5 HP) |
| N/A | Motor Starter/Contactor (*Main Blower – if unit does not have VFD) |
| Filter (4” x 24” x 24”)
|
As we approach the completion of our latest project with Ship & Shore, I wanted to express my sincere appreciation to you and your entire organization for another job well done. From engineering, to fabrication, delivery and installation, along with the technical support provided throughout the project, your team excelled in all areas.
Kent Sibley
Vice President, Foam Fabricators
